Moisture Trap

Leak-proof Moisture Trap
Fast, economical way to install a leak-proof trap
Draws surrounding duct area down into a funnel shape, ensuring trapage

DESCRIPTION

Galvanised Moisture Trap for use in rigid ductwork and/or fan coil drip trays

BASIC USE

When moisture collection is a problem in the ductwork or trap pans, our Moisture Traps are an economical and fast way of installing a leak proof trap

DIMENSIONS

CODEMOISTURE TRAPDIAMETER OF MPT PIPEDIAMETER OF HOLE IN DUCT WALLDIAMETER OF FUNNELTOTAL HEIGHT W/O CAP
141519mm Moisture Trap19mm27mm86mm27mm40mm
141640mm Moisture TrapM4849mm123mm72mm

COMPONENTS

A: Duct Wall
B: The funnel is made of 12mm gauge galvanised sheet metal and cannot be deformed
C: A large area of the duct is drawn down into a funnel shape
E: The threaded trap, nut and cap are corrosion restraint (zinc electroplated)

ASSEMBLY

1: Drill 1 1/6″ hole in the duct wall with the appropriate drill bit
2: Insert the Traps
3: Position the funnel and screw on the nut. Tighten the nut until the sheet metal wall is drawn down into the funnel. Typically, gaskets are used. A sealant need only be applied when damaged or very rough metal surfaces are used. The cap is to be used when there is no trap pipe.