Access Panels @ Bullock Mfg Pty Ltd

[ Product Features ] [ Dimensional Information ] [ Ordering Instructions ] [ Installation Instructions ]

Bullock Mfg Pty Ltd. Manufactures this high quality product for the air conditioning industry. Used as an easy re-sealable way of gaining access to rigid air conditioning ducts and conditioner housings for equipment maintenance and cleaning purposes. Equipment such as fire dampers, smoke and volume dampers, variable air volume units (VAV), duct heater coils and filters can all be accessible for compliance with building code standards.

Tested with fire dampers to AS1530.4 - 1997 to comply with AS4254 - 1995,
refer to figure 2.3 (F)


This product has been simply designed to ease of operation. Simply turn the galvanised steel sash cams provided on the panel to un-lock then remove from it's frame.
Frame:	Made from press formed galvanised steel 0.8mm - 1.0mm.
Panel:	2-piece press formed 0.6mm - 0.8mm galvanised steel.
Seal:	1 piece heat welded PVC compression gasket formed to ensure an airtight seal.
Locks:	2 or 4 galvanised steel sash fasteners. Combining a specially designed hook and cam system to give an airtight seal between the panel and the frame. Optional brass or stainless steel available as a special order.
Insulation:	Thermal and acoustic 25mm fibreglass insulation is sealed air tight within the sandwich panel via the PVC seal.


Model #	Nominal Size	A x B	C x D	E x F	Carton Quality	Carton Weights
AP0	650 x 500	700 x 550	652 x 500	609 x 457	3	19kg
AP1	500 x 375	545 x 419	500 x 366	462 x 325	5	18.3kg
AP2	375 x 240	425 x 288	372 x 239	332 x 196	10	18.5kg
AP3	240 x 150	284 x 194	240 x 148	207 x 116	10	9.5kg

When ordering please nominate the following information.

Panel size. (Nominal Size)

Quantity of panels.

Click here for larger sizes.

For further information contact your local representative. For installation instructions please click here.

[ Top of Page ]

Specifications subject to change without notice.