[ Back to Hardware ]

Englemate duct flange. Roll-formed from premium grade galvanised steel. 
Product size and code # 35mm x 6m profile #1225. 25mm x 6m profile #1226.

 Reinforced drive cleat - RDC. 3 metre length. 20ga. Roll-formed galvanised steel. 
Product code #1222. 		 Flat slide cleat. 2.44 metre length. 20ga. Roll-formed galvanised steel. Product code #1223.
Engelmate Duct flange corners. 35mm x 16ga. galvanised steel. 
Product code #1227/1. Carton quantity 250. 

 Engelmate Duct flange corners. 25mm x 16ga galvanised steel. 
Product code #1228/1.
Carton quantity 500. 		 Duct corners to suit drive slide/cleat. 
Product code # 1224.
Carton quantity 5000.
TDF Corners - to suit TDF roll-formed duct. 35mm x 16ga. galvanised steel.
Product code #1242/1.
Carton quantity 250. 		 TDF Corners - to suit TDF roll-formed duct. 25mm x 16ga. galvanised steel. Product code #1243/1. Carton quantity 500.  TDC Corners - to suit TDC roll-formed duct. 33mm x 16ga. galvanised steel.
Product code # 1244/1.
Carton quantity 250. 
[ Top of Page ]
TDF & TDC - 304 stainless steel corners. 35mm/33mm x 16ga. 
Carton quantity - 250. TDF 
Product code #1242/3.
TDC Product code #1245. 
 Duct corner nuts and bolts. To suit TDF,TDC, Engelmate,Ductmate corners. 
Product sizes and code# 3/8" x 1" suit 35mm corner. #1227/5. 5/16" x 1" suit 25mm corner #1228/6. 
 Fire damper low melting point nylon bolts. Melting point temperature below 500 Deg. C. For use with TDF/TDC flange channel connections. 
Product code #4908/1. 
TDF / Englemate Tabbed flange clips. 6" x 20ga. Twin tab - galvanised steel. 
Product code #1230/1. Carton quantity 500. 
 TDF / Engelmate Tabbed flange clips. 3" x 20ga. single tab - galvanised steel. 
Product code #1230/2. Carton quantity 1000. 
 
 TDC Tabbed flange clips. 6" x 20ga. twin tab - galvanised steel. 
Product code # 1231/2. Carton quantity - 500

[ Top of Page ] [ Back to Hardware ]
Specifications subject to change without notice.

Copyright © 2004 Bullock Manufacturing Pty Limited. All Rights Reserved.